This is a Kyocera 210Wp solar panel. It is now mounted on the davits of Linocat. Currently the mount is build in away that it is not adjustable. Also after havin this panel now for one year and due to experience from Rudolf and Gabriele on the Lagoon "Sunways" we decided to go for another 2 :-) But lets look at the installation now. The thick bar that connects the davits is an add on from there the solar panel is mounted. The cables are then running into the davit itself. By the way since they are open there IS acutally water inside them sicne there is no hole at the bottom to let it out again. To the left the davits are bolted to the boat. Right in the middle of this 4 screws we drileld a hole and routed the cable through after the water came out. This Votronic 225MPP solar regulator was then connected. BEFORE that please make sure to cover the solar panels so that no pwer is produced. Without a load the voltage can shoot up and you might hurt yourself or destroy things. The...
Gestern erreichte ich 3000km mit der 1200 XE, sie ist also nun quasi "gut eingefahren". Das Mopped macht mir Spass, ist kein Leichtgewicht, weil eben alles aus Metall ist, was nach Metall aussieht und mein Po schmerzt mir erst nach ca 3h. Ich habe das Bluetooth-Modul nachruesten lassen und verwende es zusammen mit den SENA Komponenten in meinem Helm. Manchmal ist es etwas nervig, bis man alle Devices in der richtigen Reihenfolge gekoppelt hat. Aktuell verwende ich den Schuberth C5 und das neue Sena SC2 direkt mit dem Galaxy S22 gekoppelt. Damit umgehe ich das BT Modul der Scrambler, werde das aber wieder umstellen. Die 3000km waren unspektakulär, lediglich die Batterie des Moppeds machte bereits schlapp. Selbst ein überbrücken war nicht möglich, da die defekte Batterie hier dazwischenfunkte. Eine Yuasa YTS10S gibt es fuer ca 80EUR im Onlinehandel und diese kommt bereits vorgeladen, man kann also quasi direkt starten. Als Tasche habe ich an der linken Seite die SW-Motech Leg...
Comments